Pentair SLİMLİNE

Pentair Slimline softening equipment is designed to remove high hardness salts from water. Presented in an elegant monoblock box. In monoblock type filters, the filter housing and brine tank are combined into one unit.

Due to their compact size, these filters can be used in apartments, offices, private homes, cafes, restaurants, etc. Designed for domestic use in cases where installation space is limited and high performance is not required.

Recommended: For apartments or houses with 1 or 2 bathrooms and average water consumption.

Filter material: Lewatite cation exchanger (Germany).

At the same time, the cation exchanger attracts hardness ions, replacing them with safe sodium ions.

Advantages of the Pentair Slimline softener filter:

It always keeps the salt tank dry. The saline solution is prepared immediately before regeneration.

Built-in mixing bypass valve (mixing mode) to adjust the water softening level.

Compact housing made of high quality polyethylene.

Signal about the absence of salt in the desalination tank

Economical water consumption for filter regeneration.

Filter service reminder

Automatic stop of water drainage during regeneration in the absence of power supply.

High efficiency of water softening due to the use of cationic resin with high ion exchange capacity.

The unique multifunctional control valve Erie 541N89 with a Russian-language display ensures automatic operation of the softener and determines the frequency of regeneration depending on the volume of water consumed.

Principle of operation

Feed water is passed through a cation exchange resin. After a certain level of contamination, the filter is cleaned through an automatic regeneration process, the process of which is regulated by a control valve.

Regeneration

The ion exchange resin used as a filter material has the ability to regenerate - it repeatedly restores its original properties. The process is carried out periodically after reaching a certain threshold level of contamination. Regeneration is carried out in several successive stages, the basis of which is washing the filter material with a water-salt solution. Thanks to the presence of a control valve with a digital regulator in the system, the regeneration process is carried out automatically.

Salt is used in the form of tablets supplied in 25 kg bags.

The package includes:

Frame

Control valve

Hose for connection to sewerage

Filter loading - 17 liters

Installation and operating instructions (in Russian)

Advantages of automatic control valve:

Fully automatic operation

System control depending on the volume of purified water

Digital LCD display

Touch flow meter

Safe and economical electronics, 24 V power supply.

Built-in surge protection

All parts of the valve in contact with water are made of environmentally friendly plastic.

The electronic controller allows you to use salt and water sparingly during system restoration.

Extensive system programming capabilities.

In addition to the main system parameters, the controller has the following additional functions and capabilities for collecting statistical data from the system:

Determining the rate of water flow from the system

Determination of daily water consumption

Calculation of average daily water consumption

Technical indicators:

Filtration type: softener

Purpose: For cold water up to 30°C.

Case type: cabinet (monoblock)

What it cleanses from: hardness salts

Capacity: 1.7 m³/h

Dimensions (w/h/d): 391 x 963 x 467 mm

Weight (with bypass): 30.5 kg

Electrical power: 230 V/50 Hz.

Loading volume: 17 l

Salt capacity in the tank: 65 kg.

Operating temperature: 2 - 48 ºС

Working pressure: 1.4 – 8.3 atm.

Salt consumption per 1 regeneration: 2.1 kg.

Connection diameter: 3/4 inch, BSP male thread.

The water pressure at the entrance to the system is at least 2 atm.

Air temperature: not lower than 2°C.

Brand: Pentair

Made in Belgium.